Nothing is more frustrating than an uncharged device, the water running hot even in the refrigerator, and your room radiating heat from all sides. That’s the struggle you go through when electricity goes out for a long time. Power cuts may not be an everyday problem in every city. However, when they strike uninvited, it is always an inverter that keeps things running smooth. From powering fans to important appliances working, it comes as a saviour for a number of electricity issues.
In spite of being an important household gadget, many people do not know how to use inverter properly and end up decreasing its lifespan, all due to minor oversight. From installation to maintenance, it requires mindful usage to make them perform at their best. Livfast home inverters come packed with some smart features, with 25% faster charging and longer backup, made from active carbon technology. Keep reading to know common home inverter mistakes you should avoid to attain maximum benefits.
Inverter Maintenance Mistakes You Must Avoid
Here is a breakdown of the most common blunders to prevent and best inverter usage tips to enhance your device’s durability and performance:
1. Overloading the Inverter:
There is one home inverter mistake that is frequent among every homeowner. They connect too many appliances at once to the inverter, which can result in going beyond its rated power capacity. Every inverter has a specific capacity in watts, and exceeding this limit not only strains the system but also damages both the inverter and the devices connected to it. It affects the protection system of the inverter, overheating it and ultimately destroying it. For example, if you are running high-power appliances like a refrigerator and a microwave simultaneously with 1200W on a 1000W inverter, then that is the recipe for failure. It will lead to an immediate shutdown.
What should you do instead:
- Always check the rated capacity of your inverter first before using it. Calculate both the startup and running usage of your devices.
- Invest in an inverter that has at least 20-30% higher wattage than the maximum load you expect.
- Utilise a power calculator to identify the total load requirement.
- Create a simple checklist for backup usage to prevent overloading and keep your system functioning smoothly.
2. Ignoring Battery Health:
The battery is the heart of any inverter. Yet many homeowners overlook inverter battery maintenance. Being the main power source, if a battery remains undercharged or a mismatch in installation, then the requirement of the inverter will affect the entire performance of the system. It can lead to reduced efficiency, shorter backup time, frequent power failures, and even premature replacement. Livfast inverter batteries are designed with Short Tabular, Tall Tabular, and Flat Plate technologies that boast high power while offering consistent and long-lasting performance.
What home inverter mistakes people usually make when it comes to its battery:
- Not checking electrolyte/water levels regularly causes the plate to dry up, reducing the battery’s backup capacity.
- Letting corrosion due to dirt and acid fumes build up on terminals. Not cleaning them may restrict the flow of the current, dropping the voltage, and even cause sudden failures.
- Not recharging early after it has been deeply discharged. This causes sulfation, which shortens its lifespan and efficiency over time.
Tips for effective inverter battery care:
- Test the battery voltage and capacity regularly.
- Only use batteries that equal the input voltage of your inverters (12V, 24V, and so on).
- Do not mix new and old batteries.
3. Wrong Installation and Wiring:
People often end up wiring their inverters improperly, which hampers their performance and safety. It is one of the most repeated home inverter mistakes when you use the wrong wire thickness, incorrect safety parts, and tight connections. The wrong installation and wiring can result in problems, including:
- The power drops, making the inverter function less effectively.
- The wires used can get too hot and risk fire.
- Increased chances of short circuits.
How can you avoid these common inverter problems of installation:
- Before taking any step, check the manufacturer’s guidelines to choose the right cable size based on the capacity of the inverter and its distance from the battery.
- Do not forget to use circuit breakers or inline fuses near the battery.
- Lastly, make sure every connection is clean, tight, and free of corrosion.
4. Improper Ventilation due to Location:
Most often, the inverters are cramped in poorly ventilated spaces or damp areas like storage rooms or spots under the staircase. The inverters generate a high amount of heat when in operation, and placing them in compact places with lower airflow can shorten their lifespan. It can risk its internal components and thermal shutdowns altogether. At the same time, keeping them in damp spaces can increase the chances of damage due to moisture and corrosion. Right heat management is another home inverter mistake that people overlook.
How can you detect overheating:
- When your inverter shuts down unexpectedly.
- When the fan begins to run fast and continuously.
- The inverter has a hot surface, or when you see warning lights.
Inverter safety tips to prevent heating:
- Always install your home inverters in a dry, cool, and well-ventilated space.
- Keep a clearance of at least 4-6 inches on all sides.
- Never install them near any flammable material.
Conclusion
A home inverter ensures your life remains uninterrupted and you don’t get any surprises during emergencies due to power cuts. They are not a ‘fit and forget’ device. With the best inverter safety tips listed above, you can not only achieve good performance but also save money in the long run.
With Livfast home inverters, you can give your home the peace it needs. Available in a variety of options for different capacities and uses, these can charge well even at voltages as low as 90V. Designed with highly advanced Pure Sine Wave technology, it helps keep your appliances running noiselessly. Apply the expert assistant feature on the portal and get guidance on finding the right inverter for your specific needs.